Description
SPECS | |||
---|---|---|---|
Model: | CL3510 | Inverter Code: | Not Inverter |
Enclosure: | TEFC | IP Rating: | NONE |
Frame: | 56C | KVA Code: | K |
Frame Material: | Steel | Lifting Lugs: | No Lifting Lugs |
Output @ Frequency: | 1.000 HP @ 60 HZ | Locked Bearing Indicator: | Locked Bearing |
Synchronous Speed @ Frequency: | 1800 RPM @ 60 HZ | Motor Lead Quantity/Wire Size: | 6 @ 18 AWG |
Voltage @ Frequency: | 230.0 V @ 60 HZ | Motor Lead Exit: | Ko Box |
115.0 V @ 60 HZ | Motor Lead Termination: | Flying Leads | |
XP Class and Group: | None | Motor Type: | 3524L |
XP Division: | Not Applicable | Mounting Arrangement: | F1 |
Agency Approvals: | CSA | Power Factor: | 74 |
UR | Product Family: | General Purpose | |
Auxillary Box: | No Auxillary Box | Pulley End Bearing Type: | Ball |
Auxillary Box Lead Termination: | None | Pulley Face Code: | C-Face |
Base Indicator: | Rigid | Pulley Shaft Indicator: | Standard |
Bearing Grease Type: | Polyrex EM (-20F +300F) | Rodent Screen: | None |
Blower: | None | RoHS Status: | ROHS COMPLIANT |
Current @ Voltage: | 12.800 A @ 115.0 V | Shaft Extension Location: | Pulley End |
6.400 A @ 230.0 V | Shaft Ground Indicator: | No Shaft Grounding | |
7.000 A @ 208.0 V | Shaft Rotation: | Reversible | |
Design Code: | L | Shaft Slinger Indicator: | No Slinger |
Drip Cover: | No Drip Cover | Speed Code: | Single Speed |
Duty Rating: | CONT | Motor Standards: | NEMA |
Electrically Isolated Bearing: | Not Electrically Isolated | Starting Method: | Direct on line |
Feedback Device: | NO FEEDBACK | Thermal Device - Bearing: | None |
Front Face Code: | Standard | Thermal Device - Winding: | None |
Front Shaft Indicator: | None | Vibration Sensor Indicator: | No Vibration Sensor |
Heater Indicator: | No Heater | Winding Thermal 1: | None |
Insulation Class: | F | Winding Thermal 2: | None |