Model: | L3510A | Inverter Code: | Not Inverter |
Enclosure: | TEFC | KVA Code: | K |
Frame: | 56H | Lifting Lugs: | No Lifting Lugs |
Frame Material: | Steel | Locked Bearing Indicator: | No Locked Bearing |
Output @ Frequency: | 1.000 HP @ 60 HZ | Motor Lead Quantity/Wire Size: | 3 @ 16 AWG, A PH |
Synchronous Speed @ Frequency: | 1800 RPM @ 60 HZ | Motor Lead Exit: | Ko Box |
Voltage @ Frequency: | 230.0 V @ 60 HZ | Motor Lead Termination: | Flying Leads |
| 115.0 V @ 60 HZ | Motor Type: | 3524L |
XP Class and Group: | None | Mounting Arrangement: | F1 |
XP Division: | Not Applicable | Power Factor: | 73 |
Agency Approvals: | CSA | Product Family: | General Purpose |
| UR | Pulley End Bearing Type: | Ball |
Auxillary Box: | No Auxillary Box | Pulley Face Code: | Standard |
Auxillary Box Lead Termination: | None | Pulley Shaft Indicator: | Standard |
Base Indicator: | Rigid | Rodent Screen: | None |
Bearing Grease Type: | Polyrex EM (-20F +300F) | RoHS Status: | ROHS COMPLIANT |
Blower: | None | Shaft Extension Location: | Pulley End |
Current @ Voltage: | 13.000 A @ 115.0 V | Shaft Ground Indicator: | No Shaft Grounding |
| 6.500 A @ 230.0 V | Shaft Rotation: | Reversible |
| 6.800 A @ 208.0 V | Shaft Slinger Indicator: | No Slinger |
Design Code: | L | Speed Code: | Single Speed |
Drip Cover: | No Drip Cover | Motor Standards: | NEMA |
Duty Rating: | CONT | Starting Method: | Direct on line |
Electrically Isolated Bearing: | Not Electrically Isolated | Thermal Device - Bearing: | None |
Feedback Device: | NO FEEDBACK | Thermal Device - Winding: | Do Not Use Eve-Not Valiid |
Front Face Code: | Standard | Vibration Sensor Indicator: | No Vibration Sensor |
Front Shaft Indicator: | None | Winding Thermal 1: | Automatic Thermal Overload |
Heater Indicator: | No Heater | Winding Thermal 1 Location: | SB |
Insulation Class: | F | Winding Thermal 2: | None |